SOUNDPROOFING DOORSWEEP CUTS NOISE AND DRAFTS

  • BLOCKS SOUND FROM COMING IN UNDER THE DOOR
  • THERMAL INSULATION:  STOPS DRAFTS
  • STOPS:  BUGS AND OTHER CRITTERS

 

A special rubber loop and metal strip cut to fit your 36″ door bottom edge-

 

After dealing with the window, sound control in a room should go to the door: a typical interior style hollow core door will pass sound quite readily. (An STC of much less than 20- this means conversation can easily be heard). If possible, it should be replaced with a solid, exterior door, the thickest you can find. “MDF” (Medium Density Fiberboard) doors are cheap and have good sound blocking qualities.

 

Make sure it’s well fitted to the frame, no gaps or crevices for sound to migrate through. If there is, use our closed cell tape that comes with this kit, (not from the hardware store).

 

The door should be sealed off as if it was 40 degrees below zero on one side. If it has a gap over 3/4″ at the bottom, use a threshold on the floor to meet the bottom of the sweep.

 

Kit  and tape: 36″ max length for standard price of $36 PP We have custom widths, Inquire!

Tweet about this on Twitter0Share on Facebook0Share on LinkedIn0Pin on Pinterest0Share on Google+0Email this to someonePrint this page