Archive for the ‘Sales’ Category
CAREFULLY READ OUR RETURN & SHIPPING POLICY.
/ REFUNDS – Because we don’t charge for handling, packing or the
shipping materials, there’s a 25% restocking charge when the product,
(Books/ CD’S are not returnable), is returned unused or uncut, in original packing, shipping prepaid, (shipping is not refundable), within 30 days.
do not charge a restocking fee for trying on headsets, but you are
responsible for the shipping back and forth.To assure prompt handling,
please call for an RMA number.Goods may not always be returnable to the
address from where we sent it to you- call to make sure you return it to
the proper place.
Simply return the item or items to us at YOUR expense, please include a copy of your sales receipt or packing list.
We will refund your purchase, less restocking fee and shipping charges. Your refund will be credited back to the source of
payment. NO Return Authorization is required but best if you get one.
*Shipping charges are not refundable for purchases. Customer is also responsible for
the cost of return shipping.
We highly recommend that you send your return via UPS, Fed EX, or insured US Mail. Items sent but not received by us will NOT receive credit for the
return. If lost, you must deal with the shipper.
The customer is responsible for all freight charges associated with a return, exchange, and reorder unless it is our mistake.
Shortages or Incorrect Orders
All claims for shortages or incorrect orders must be presented to us by fax, e-mail, or phone within 5 business days from receipt of your order. (Be sure to give us the order number, item, and your name.)
shipped, but refused by the customer will still be charged shipping
charges. Orders which have already been submitted to our shipping
company cannot be cancelled or changed. Orders which have already
reached our distribution center cannot be cancelled, changed, or
stopped. Shipping charges will apply if the order has shipped or is in
our distribution system. Under certain circumstances, orders can be
diverted if enough time for interception is available. THE SHIPPING COMPANY will charge for this.
Most Orders are shipped via UPS to the United States only. Either Standard Ground, UPS 3- Day, or UPS 2nd Day Air delivery is available.
Shipping charges are calculated based on the dimensional weight of
the order using the actual UPS published counter rates by UPS online.
There are no hidden handling charges. Orders placed by our shopping cart may not be correct and are subject to our review for accuracy. If the shipping seems high, call us for a confirmed quote.
Shipping calculations made by our shopping cart that show “0″ means it
cannot make the shipping cost calculation, not that shipping is free.
Free shipping is only for those special items marked “Free Shipping”.
shipping addresses: failure to provide suite number, floor number or
other pertinate information causing the shipping company to charge us
for researching will be chanrged back to the customer! This can
be as much as $15 or cause the shipment to be returned to us, so please
make sure your address is perfectly correct. Cancellation of the order
under those conditions do not remove your responsibility of the charges.
See below for more conditions:
ground can take up to 7 work days for delivery, depending on how far
your address is away from one of our warehouses spread throughout the
United States. Do not include weekends or holidays. We
make no guarantee on delivery time and are not responsible for delays
caused by the shipper. No deliveries are made on weekends or holidays.
3 Day Select:
3 Day Select is twice as fast as Ground. Selecting 3 Day Select does NOT mean you will receive your order three days after the order is placed. Only that we will ship the order using UPS 3 Day Select. Meaning, you will receive your order within 3 business days, once the order has shipped. Do not include weekends or holidays. We make no guarantee on delivery time and are not responsible for delays caused by UPS. No deliveries on weekends or holidays.
2nd Day Air:
2nd Day Air does NOT mean you will receive your order two days after the order is placed. Only that we will ship your order using UPS 2nd Day Air. Meaning, you will receive your order within 2 business days once the order has shipped. Do not include weekends or holidays. We make no guarantee on delivery time and are not responsible for delays caused by UPS. No deliveries on weekends or holidays.
Orders – Military
APO and FPO – CAll for a quote for Intl Mail.
VERY IMPORTANT! DO NOT REFUSE A TRUCK DELIVERY! It will be treated as a new shipment by you at a rate much higher than the rate we negotiated outbound to you! YOU will be legally responsible for it.
A truck COD inbound charge from you will be automatically refused by
our shipping dept. The trucking company will then sell the goods at
auction if you do not pay the return shipping BACK TO YOU, inbound and outbound.
Call 760-752-3030 for more details. 8-5 pacific M-F.
Resiliently mounted wall and ceiling Gypsum board (Drywall/ Sheetrock/ Wallboard) is fast becoming an industry standard for reducing sound transfer between rooms. (Soundproofing Rooms).
The SSP Sound Isolation Mounting Clip is used with Drywall Furring Channel (DWFC) in order to mount drywall panels. The clip has a molded neoprene element that provides high sound insulation between the panel and the framing. Metal ends provide sturdy support.
Build-out of the pad/channel assembly is 1-1/2″
It mounts with screws (or other fastener appropriate to the material to which it’s mounted), providing a low-profile sound control system that is low-cost and simple to implement.
One mount is required for every four sq. ft. of wallboard area. A typical 8′ wall would have SSP clips mounted to the DWFC creating three horizontal rows, one a few inches from the top and one few inches from the bottom and another across the middle. 2″ Neoprene 3/8″ thick Vibration padsare spaced every 2′ on the floor to support the edge of the drywall panels. The panels are then attached to the DWFC with drywall screws in the normal manner. A gap must be provided where the walls meet the ceiling and other walls and sealed with acoustical caulk
The gap at the floor is sealed either with lots of caulk and/or with “Backer Square” to reduce the amount of caulk needed to seal the large gap left by the vibration pad. Adding one layer of 5/8″ Fire Code Drywall in this manner will more than double the sound reduction of the existing wall. More sound reduction would be obtained by adding more sound control elements into the project.
Ceilings are handled similar to the above. Installation details are the same as for other clips.
Super Soundproofing™ Acoustical Foam Panels and Hanging Baffles for Reflective Sound Control
Super Soundproofing™ possesses immense expertise and competence to provide a wide range of innovative products and solutions for acoustically treating areas that are prone to high intensity and disturbing noise. Amongst our rich portfolio of reliable soundproofing products, our acoustical foam panels and hanging baffles are largely purchased as they are intelligently designed to offer effective sound absorption with a minimum thickness.
Our Polyurethane acoustic foam panels are used to absorb noise in nearly every setting, from compressor rooms and recording studios, to computer rooms, punch presses, churches and gymnasiums. The acoustical panels can be installed easily on walls to handle the toughest and most unsettling noise problems. Baffles can be hung to interrupt and absorb free-floating noise. Sound blocking hanging baffles is especially ideal for big indoor areas with hard surfaces, such as gyms, manufacturing areas, auditoriums and indoor swimming pools to increase NRC (Noise Reduction Coefficient).
Note: Polyurethane Acoustic Foam Panels and Baffles are also available in Class One Flammability Factor. GO
Noteworthy Features and Benefits
Super Soundproofing™ acoustical foam panels are available in Anechoic Wedge, Pyramid, and Max Wedge designs. Also, our range of hanging baffles are available in Anechoic Wedge Design and Cornertec design.
Our products exhibit the following features and benefits.
Note: Not all sizes and thicknesses are available in every design. Please see the specifications for details. Custom orders are OK.
- They are designed and engineered for effective absorption of sound generated at low, mid and high intensities/frequencies.
- They are the most cost-effective acoustic solution available in the market for maximum noise control.
- They have flammability rating of UL94HF-1.
- They are available in the aforementioned three designs; customization is possible in these designs.
- They are available in a variety of dimensions and protective facings, sizes, and thicknesses from 1″ to 8″ to achieve the precise level of sound control that you need.
- They are fabricated using superior grade acoustic polyurethane foam; this supreme construction allows the foam to deliver consistent acoustic performance.
- They are readily available in a wide range of color options and in an assortment of film facings.
Super Soundproofing™ acoustical foam panels and hanging baffles are extremely popular among customers from various industrial, commercial and domestic sectors for achieving effective soundproofing in:
- Machine, equipment and compressor enclosures
- Machine, equipment and compressor enclosures
- Engine compartments
- Automotive cabs
- Computer and server rooms
- Clean rooms and medical facilities
- Manufacturing facilities
- Utility rooms
Besides these common application areas, each design of Super Soundproofing™ acoustical foam and hanging baffles has been designed exclusively for use in specific areas:
Anechoic Wedge Design –
Some of the application areas of Super Soundproofing™ Anechoic Wedge Design are:
- Industrial noise control
- Firing ranges
- In-plant noise
- Metalworking operations
- Commercial, home and audio market
Pyramid Design –
You can select Pyramid design from Super Soundproofing™ for soundproofing in:
- Office & telemarketing areas
- Broadcast/recording studios
- Distance learning facilities
- Churches, homes, and more
Max Wedges Applications –
You will find Super Soundproofing™ Max Wedges Design extremely useful in:
- Anechoic chamber environments
- Test chambers
- Low frequency applications
Anechoic Wedge Design
- Industrial facilities
- Fellowship halls
- Entertainment facilities.
Cornertec Design – Widely used in:
- Room Corners
- Home, office and audio.
Acoustical Foam Panels: An Easy-to-Install Noise Control Solution
Hitherto, Super Soundproofing™ has been focused on providing customers with cost-effective yet high performing acoustic solutions that ensure peaceful, calm and quiet environments. Our foam panels are not an exception to this. By offering a complete range of acoustical soundproofing materials and solutions, we have created our niche in the market. Contact us to learn more.
Note – We have even cheaper solutions using cotton batting. Call!(760) 752-3030 8-5 Pacific or use the box below.
FireFlex Foam is an excellent noise absorber and is rated for high-temperature applications or in buildings requiring Class One rated materials. Heat resistant to 482° F and able to withstand constant temperatures up to 320° F, FireFlex is engineered for environments where temperatures are high, sparks or other hot materials may fly, large numbers of people congregate or flammability is an issue.
FireFlex materials are constructed of lightweight, porous acoustics melamine. The material’s internal structure is a spacious cellular complex of slim, flexible webs that are membrane-free and completely open-celled. The result is that FireFlex materials are low-density and extremely lightweight.
FireFlex is approved as a Class One building material and is resistant to many chemicals. Panels come in two different colors: White and Gray. For an added affect, We can paint panels with three different types of paint. Standard latex, Multi-Spec latex (great for the theatre room or for that extra splash of color). Third, for damp areas and/or easy cleanup, chose FireFlex with a Hypalon protective skin. These Sound Blocking foams do not reflect sound.
Foam products that are constructed of gray FireFlex include:
FabTec – Made of Fireflex and fire rated fabric, with a flat surface and fabric face.
Anechoic Wedge – Contoured profile traps airborne noise and dissipates it by absorbing the kinetic energy created by sound waves.
Pyramid – Appropriate for almost any application; attractive design reduces reflected noise within a room by trapping and absorbing sound energy.
Max Wedges – Uniform wedge design helps trap airborne industrial noise. Open-cell structure dissipates noise energy to control harsh reflected noise and reverberations.
Hanging Baffles – Contoured profile Anechoic Wedge pattern absorbs airborne noise and dissipates it.We now have flameproof MLV sheet in white color! See: http://www.soundproofing.org/infopages/flooring.htm
CLOSED-CELL PIPE INSULATION
BLACK OR WHITE
Pipes need insulation too. Not just for thermal purposes, (even though that’s important, too), but especially for sound control.
This pipe insulation is the biggest, heaviest and the best thermal/sound insulator we could find and deserves to be installed in the walls/floor/ceiling before closing them up.
|Tubes Per Carton||NOMINAL 1″ WALL Use any of these P/N’s to order.||Copper Tube OD||Iron/PVC Pipe OD||Price per Ft.||Price per tube length (6′)||Color- Price is for black-add 15% for white|
|20||445-108-06||6-5/8 – 1||5/8″||3/8″||$2.08||$12.48||Black or White|
|15||445-126-06||6-3/4 – 1||¾”||$2.35||$14.10||Black or White|
|15||445-146-06||6-7/8 – 1||7/8″||½”||$2.55||$15.30||Black or White|
|12||445-136-06||6-3/4 IPS – 1||–||¾”||$3.12||$18.72||Black or White|
|12||445-186-06||6-1-1/8 – 1||1-1/8″||–||$3.13||$18.78||Black or White|
|10||445-166-06||6-1 IPS – 1||–||1″||$3.64||$21.84||Black or White|
|8||445-226-06||6-1-3/8 – 1||1-3/8″||–||$3.65||$21.90||Black or White|
|7||445-266-06||6-1-5/8 – 1||1-5/8″||1-1/4″||$4.11||$24.66||Black or White|
|7||445-246-06||6-1-1/2 IPS – 1||–||1-1/2″||$4.78||$28.68||Black or White|
|6||445-306-06||6-2-1/8 – 1||2-1/8″||–||$5.07||$30.42||Black or White|
|6||445-286-06||6-2 IPS – 1||–||2″||$6.38||$38.28||Black or White|
|6||445-346-06||6-2-5/8 – 1||2-5/8″||–||$7.22||$43.32||Black or White|
|5||445-326-06||6-2-1/2 IPS – 1||–||2-1/2″||$8.33||$49.98||Black or White|
|5||445-386-06||6-3-1/8 – 1||3-1/8″||–||$8.75||$52.50||Black or White|
|4||445-366-06||6-3IPS – 1||–||3″||$9.25||$55.50||Black or White|
|4||445-426-06||6-3-5/8 – 1||3-5/8″||–||$9.56||$57.36||Black or White|
|3||445-466-06||6-4-1/8 – 1||4-1/8″||3-1/2″||$11.28||$67.68||Black or White|
|3||445-446-06||6-4IPS – 1||–||4″||$12.16||$72.96||Black Only|
|2||445-496-06||6-5IPS – 1||–||5″||$14.21||$85.26||Black Only|
|2||445-606-06||6-6IPS – 1||–||6″||$16.34||$98.04||Black Only|
Note the different sizes listed in the chart for Copper vs Iron/PVC. Measure your pipe carefully to be sure you get the right size for your kind of pipe. The size may be printed right on it. Pipe insulation should fit snugly around the pipe. If you should get the wrong size, oversize, cut a strip out of it lengthways to reduce the inside diameter. Don’t overlap! If you have some that’s too small for your pipe, you can order some 1″ thick “Super Soundproofing” Absorbent Foam and fit strips of it into the pipe insulation to widen it.
When joining pipe insulation together, apply a light coating of contact cement to the edges and allow to dry, then apply a tack coat and press edges together to join. Cover the pipe with glue to provide an intimate contact to the pipe insulation to improve damping effect of the noise vibration in the pipe.
Pipe insulation comes in 6′ lengths and is to be slit lengthways for easy installation. It’s best to apply the material to the pipe with adhesive, as well as sealing the slit with adhesive, long-ways. (A sharp razor knife or electric turkey carving knife may be used). The entire pipe must be glued and covered! No gaps or crevices.
Now, After covering all your pipe, in walls or ceilings, for vertical runs of pipe, line the inside if the wall cavity the pipe is in with “Super Soundproofing” Foam, the thicker the better. 1/2″ is nominal. Cover the whole inside of the panel, front and back, including the stud facings. For horizontal runs, do the same, additionally make sure the pipe has clearance through the holes in the studs and is not touching. Sometimes removing/repositioning the clamps holding the pipe will help. Push soundproofing mat into these clearances. If there is too little clearance try to widen the gap somehow. (Saw, chisel, drill away, etc). The pipe must have clearance or it will transmit sound vibration into the studding, which in turn will re-radiate it.
When installing new pipe, if you have a choice, cast iron pipe is superior to PVC pipe for noise control, but should still be covered with pipe insulation.
This insulation will not support a flame, has no odor, nor will it absorb moisture, cause rot or mildew, etc
Note: The Black Pipe insulation listed above is 1″ thick and may be ordered right here. It is available from stock at our San Marcos store. Other thicknesses are available, as well as the white color pipe insulation, but on special order. (2-3 weeks).
You can get the white “Pipe Lag”, (our version) from us immediately. Check with us for details. 760 752 3030
Using our tape for soundproofing
A variety of tapes are available to assist in accomplishing effective sound proofing. When you need every last STC point, little things mean a lot!
Here are some of the tapes we stock and a short explanation of their uses.
How to “Stagger-Stud” and soundproof existing stud walls using Sound Isolation Padding Tape: Assuming the wallboard has been removed and the studs are exposed- Apply 2 layers of the green 1/8″X1-7/16″ tape to every other stud. This will build out the stud by about a 1/4″. The tape has a peel-off backing and may be cut with scissors. Place your wall panels over the studs and fasten them only to the studs which have the tape. If the other wall is open do this to it also, alternating the studs, that is, do not apply tape to studs which have tape on them already on the other side. This system breaks the sound path through the studding and is very effective and inexpensive for reducing sound transfer through the wall. If you don’t do anything else, do this! It can improve the sound reduction of your wall, especially at speech frequencies. Of course, for maximum sound reduction, other added techniques are to be employed!
Very effective as an isolation padding for joists and metal Resilient (RC-1 RC-2) and or Hat channel. (DWFT)
TIP: After running your drywall screws in, back them off a bit by holding connection, then rotating your screw gun counter-clockwise to release some of the pressure. This will relieve some of the the pressure of the drywall panels on the tape, allowing it to perform better. Just make sure the head is recessed enough that filling and painting it will not show through.
Black Foam tape is used to seal doors and windows as well as to change the acoustical properties of flat sheets installed on walls and ceilings. It’s a 1/8″thick vinyl-nitrile tape with self-adhesive backing. (Different than the above). Same material as our absorbent mat. Wrap pipes, ducts or stick on metal panels (computers too!) to reduce noise transfer and vibration. Use the 4″ width cut into squares to sandwich between wall panels (Drywall and “soundboard” Homasote) for improved sound control and frequency response. Use the 2″ width on “hat” channel or wall stud facing and the 1″ on resilient channel for additional padding of the drywall panels.
We also have a gray tape in widths of 1/4″, 3/8″ & 1/2″ for door sealing. (For those who prefer a lighter color than the black above).
Magnetic tape is also available. Used mostly for holding curtain/drapes together at the center joining, it’s also useful for many other applications where the joining needs to be redone on a regular basis. Also for Plastic window inserts!.
- A specially formulated black tape for holding “Flooring” or “Floormat” seams (MLV) together. Apply a thin bead of caulk at the seam joint opening and cover with the tape. 2″ wide X 108′ long rolls. Lead tape is actually preferred for this and we have it in 1″, 1-1/2″ and 2″ widths.
- Super Soundproofing™ Acoustical Sound Backer Square foam tape. Like “Baker Rod”, “Backer Square” is a 1/2″X1/2″ (or 1/2″X3/4″) square closed cell foam tape for closing off gaps at the edges of wallboard without having to use inordinate amounts of acoustical caulk. The adhesive backing makes it easy to apply to the edges of the panels before mounting to the wall or ceiling. Can also be used to seal large gaps in doors or windows.
- Metal (lead) 5 Mil tape: probably the very best material for sound control. Typically used on seams of drywall panels and along the perimeter of the walls and ceiling where joints are difficult to seal against sound leakage. Very effective on pipes and inside wall panels. Usually very difficult to find- to our knowledge only available from us on this website. Available in 1″, 1-1/2″ with adhesive backing and in 2″ wide (1/32″) with or without adhesive backing. Push the “Buy Tape” button to see a selection.
- Double-sided foam tape is used to attach sound control curtains and drapes to themselves and the walls to improve sound control. Our product is a sheet of 4 strips 3/4″ wide and 4.5″ long for a total of 18″ with a double peel-off backing. Use wherever the curtain needs to be brought up to the wall. Usually one sheet per side of a 8′ tall curtain will work fine. You can use your own foam tape or ours- it’s $1 per sheet, probably cheaper than you can buy it locally if you can find it. Not to be used for holding foam or MLV.
Soundproofing by Vibration Isolation Pads
Super Soundproofing™ offers you a complete range of anti vibration pads that are unrivalled in the market for reducing sound and vibration associated with a wide range of machines and equipment. Over the years, we have been providing efficiently designed vibration pads that are superiorly made from high quality rubber polymers and cork materials. The design and fabrication of these pads are such that they are highly resistant to aging, oil, water and contaminants. With Super Soundproofing™, you will be astonished to see a rich inventory of vibration pads in various options of solid cross-ribbed design and with variety of thickness of cork centers.
Note – Large machines such as the new Fitdesk or fluid trainers like Kurt Kinetic may need a floating floor made from panels like these:
[BUY] . Use these small “Dimple Pads” pads under each corner for a Treadmill, etc or other exercise machine.
Super Soundproofing™ anti vibration pads are extensively used in reducing vibrations and noise produced by machines and equipment and also for providing a firm floor footing. The product is massively purchased for applications in:
- Power Generation
- Industrial Machinery
- Test Equipment
- Small Motors/Pumps/Compressors
- Large Motors/Pumps/Compressors
- Diesel Engine Applications
Noise Vibration Pads for Machines
If your HVAC equipment and several other categories of machineries are very noisy, creating airborne sound and vibration, Super Soundproofing™ anti vibration pads are the cost effective solution. They are designed exclusively to limit sound and vibration of the machines such as:
- Running machines
- Fitness equipment
- Home appliances
- Tool room machineries
- Press machineries
Applications are not limited to these aforesaid lists, but extend to several other machineries and equipment that generate loud noise and vibrations.
Super Soundproofing™ Anti Vibration Pads Advantages
By partnering with Super Soundproofing™, you will receive highly efficient acoustical vibration pads at the best and unbeatable price range. The product is unrivaled in the market due to its superior fabrication and features, such as:
- Vibration pads available at Super Soundproofing™ are fabricated using high quality elastomeric ribbed neoprene, specially compounded to resist aging, compression set, water and oil.
- They are constructed with alternate rib heights, cross-ribbed, with a cork center for additional sound isolation.
- Durometer of these pads is 60 on the “A” scale, which is the best available in the market.
- Maximum loading capacity of each cork center pad is 50 pounds per square inch. Pads may be stacked for increased isolation and capacity. (A 2″ pad will support 200 lbs).
Pads in Stock at Super Soundproofing™
Choose the most appropriate size of anti vibration pads from the list follows:
- 2″ X 3/8″ thick ribbed neoprene pads: $1.00 Ea. w/o cork center.
- 18″ Sq. Pads $32.50 Ea. Ribbed Neoprene (W/O cork)
- 2″ wide by 18″ long strips: $18.00 (All prices are plus shipping!)
- 2″ Pads: $1.50 Ea. Cork center
- 3″ Pads: $3.00 Ea. Cork center
- 4″ Pads $6.00 Ea Cork center
- 6″ Pads $9.00 Ea Cork center
- 12″ Pads $18.00 Ea Cork center
- 18″ Sq. Pads $38.50 Ea. Cork Center
- 2″ wide by 18″ long strips: $18.00 (All prices are plus shipping!)
2″ Soft Pads: $.99 Ea. A soft pad using a combination of foam and MLV. for delicate machinery like turntables, printers, etc. Use for sewing machines, too. (Use 2 stacked for each bearing support for heavy machines).
If your exercise machine is very noisy, creating airborne sound like a Fitdesk, or the floor doesn’t have much sound reduction, use a MLV sound barrier: “Floormat” (use the 4’6″ width with foam backing-long enough to go past the ends of your machine a foot or two!). This may be needed in addition to vibration pads.
or other exercise machine
Set of 4 pads……………………….$19.95
Pick the Right Size for your Applications
Pick the right pad size for the bearing weight, not the size of the footing. Pads with 3″ are best for 2X4 sills for wall studding. Put under the studs or space about 2-3 feet apart under the sill depending on wall load. Use the 2″ X 3/8″ pads neoprene without cork as support for your drywall panels edge. Cork center Pads are all approx. 7/8″ thick.
Use rubber furniture cups to keep vibrating, and active machinery (like washing machines) on to the vibration pads. Sometimes some construction adhesive, like “Liquid Nails” or “GOOP” is helpful.
For more anti-vibration solutions, see also the page on soundproofing appliances!
“Quietud: Una practica guia para el control del ruido €
Anteriormente impresa por la EPA.
su primer recurso de insonorizacion en la internet
Ahora disponible, para usted , una reimpresion de el popular manual de insonorizacion, este manual esta impreso con las reglas establecidas por la nacional EPA. Publicado por tiempo, nosotros ponemos a su disposicion una reimpresion, de este manual solamente por el bajo costo de impresion y pago de correo.
“Quietud: Una practica guia para el control del ruido” Anteriormente impreso por la Nacional EPA, como “Quietud en el hogar”. Con 120 Paginas, 8.5″ X 11″ completamente ilustradas, incluye detalles tecnicos exactos, simples y sencillos sin mucha tecnica.
Order on your credit card from a secure server
INDICE: Basicos principales para la reduccion del ruido.
El control del ruido desde su origen.
Conceptos de origen, trayectoria y receptor.
Requerimientos para el funcionamiento de la quietud
El control del ruido destro de la senda de transmision.
Factores que afectan el recorrido del sonido.
“Quietud” dentro de la trayectoria.
Protegiendo el receptor.
Control del ruido en el hogar.
Transmision y aerotransportacion del ruido en la estructura.
El bloqueo del ruido y sus efectos.
Franqueando la transmision del ruido.
Soluciones generales para el control del ruido en el hogar.
Absorcion del sonido VS la insolacion del sonido.
El ruido de la cocina.
Cuartos de juego y recreacion.
Corredores, pasillos y escaleras.
Mejorar la privacidad de su alcoba, y el area del piso del bano.
Perfeccionando la aislacion de sonido de los muros.
Perfeccionando la aislacion de sonido del piso y construccion del techo.
Control de el piso que rechina.
Control de las escaleras que rechinan.
Control del ruido de los sistemas de calefaccion, ventilacion y aire acondicionado.
Control del ruido del conducto.
Ruido y vapor del calentador.
El ruido del rodapie del sistema de calefaccion.
Control del ruido de las instalaciones sanitarias.
Control del ruido del chorro del canal de deshague.
Como se coloca la aislacion de ruido en su hogar en contraste con el aire libre.
Seleccionando la tranquilidad de su casa o apartamento.
Una guia para la compostura de averias.
Analizando el problema.
Como buscar las fugas de ruido.
Usando sus oidos €“ y un contador de ruido barato.
Usando en su casa los aparatos e implementos que mencionamos.
Probables causas del ruido, quejas, problemas y soluciones.
Tecnicas generales para disminuir el ruido.
Indice especifico que le muestra problemas y remedios del ruido.
Este manual viene escrito en capitulos, por practico y guia, ha servido a muchos para resolver problemas del control del ruido/sonido. Incluye tecnicas especificas para usar en la absorcion del sonido, los materiales a usar y sus STC raitings.Contiene imagenes sobre la reflexion, la reverberacion y fracciones en aplicaciones para motores, generadores. En la construccion de casas, oficinas e industrias. Ruido de aviones, aves, perros ladrando y muchas mas ilustraciones.
2. Nosotros le enviaremos unos pequenos ejemplos a cuenta nuestra de los materiales acusticos , asi como una guia para usar los canales de metal para la maxima reduccion de sonido al costo mas bajo!
Ordene con su tarjeta de credito por el servidor de seguridad!
Obtenga una copia de este libro por correo……..Por el precio de $15.00 dolares con porte pagado (Canada y Mexico agregar $3.75)
(Usted selecciona este medio de envio o tambien se lo podemos enviar a su cargo de un dia para otro si usted tiene su propio numero de cuenta para envios en alguno de estos medios: FED-EX, Airborne, UPS,
Obtenga una copia rapido por correspondencia de prioridad……Por el precio de $18.50 Con porte pagado (Tambien enviamos algunas ordenes al extranjero por este precio, solamente por correspondencia ordinaria.
Obtenga su copia igualmente rapido por aire (UPS) Por el precio de $28.50 dolares, en el extranjero. $24.00 dolares.
Contractor Resources For Soundproofing and Noise Control.
The Super Soundproofing Company provides expert advice no matter what your level of expertise. You can do-it-yourself or use a handyman or contractor.
Looking for a good contractor? Here are our recommendations for Southern California.
Need a good soundproofing contractor for the Southern California area? San Diego, Orange County, Los Angeles, Riverside? Call Us !
You can contact noted contractors for other areas- Call!
Contractors are only listed here when we have confidence in their work.
architectural soundproofing for owner/builders.
WE ACTUALLY MAKE THE FOLLOWING ITEMS:
* SPECIAL ANTI-VIBRATION MOUNTS FOR:
* DOOR SWEEPS OF SPECIAL SIZES & DOOR COVERS CUT TO ORDER.
* LOW COST SOUND ABSORBING WALL PANELS IN LARGE SIZES – up to 6’X10′
* SOUND CONTROL DRAPES & BLANKETS
* “MAXI” WINDOW PLUGS MADE TO ORDER.
* SOUND “BOXES” FOR PUMPS & MOTORS
* SPECIAL ‘PYRAMID PUCKS” FOR ANTI-VIBRATION FLOORS.
To save on shipping, some of these bulky items can be supplied in the form of kits – INQUIRE!
Use the form below or call 888-942-7723